Description

Specification:
Screen: 5-inch touch screen
Memory: 1G
Memory: 8GB
Battery: 4000mAh rechargeable lithium battery
OBD II input voltage range: 9~18V
Charging method: DC 5V charging cable or diagnostic cable connected to DLC through the vehicle
Working temperature: -10℃ to 50℃
Storage temperature: -20 to 70℃
Languages: English, Spanish, French, German, Italian, Russian, Japanese, Korean, Portuguese

Function:
1. Intelligent diagnosis (automatic detection): After the tool is successfully connected to the vehicle, the system will start the automatic detection process. Once the entire process is successfully completed, a diagnostic report will be automatically generated and sent to your email (if linked).
2. Manual diagnosis: If automatic detection fails, manual diagnosis can also be performed. Diagnostic functions include version information, reading fault codes, clearing fault codes, and reading data streams (supporting three display modes: numerical, graphic, and connection).
3. OBD II diagnosis: Supports 10 OBD II test modes, including EVAP, O2 sensor/M ready, MIL status, VIN information, vehicle monitor test, etc.
4. One-click update: allows you to update your diagnostic software and APK online.
5. Diagnostic History: This feature provides quick access to the test vehicle and allows the user the option to view a test report or continue from a previous operation. You don’t have to start from scratch.
6. Diagnostic Feedback: Use this option to let us know about vehicle issues for analysis and troubleshooting.
7. DTC Library: Allows you to retrieve diagnostic trouble code definitions from an extensive DTC database.
8. After the vehicle is successfully connected, the real-time battery voltage is displayed.

Frequently Asked Questions:
1. The system stops while reading the data stream. What is the reason?
Could be caused by a thin connector. Make sure to turn this tool off.
Plug in the connector and turn it back on.

2. main unit displays flash when starting the engine.
Caused by electromagnetic problems, and this is a normal phenomenon.

3. There is no response when communicating with the board computer.
Check the proper voltage of the power supply and check if the throttle
is closed and the transmission is in neutral and there is water
Right temperature?

4. What to do if the system does not start automatic entrance detection?
Check the following possible reasons:
Bull if the tool is properly connected to the DLC car.
If automatic detection is turned off in the connection switch, slide it to In.

5. Why are there so many fault codes?
Usually this is due to a bad connection or ground circuit.

6. How to update system software?
1. Turn on the tool and ensure a stable internet connection.
2. Press ldquosettingrdquo in the working menu, select ldquoaboutrdquo->ldquoversionrdquo and press ldquoDetect the
system version to proceed to the system update page
3. Follow the on-screen instructions step by step to complete the process. can.
This may take a few minutes depending on your internet speed. Please be patient. after that.
The update finished successfully, the tool will restart and enter automatically work menu.

Packing List:
1x Creade 123E Professional Headset
1x OBD II Diagnostic Cable
1x DC 5V Charging Cable
1x User Manual
1x Carry Bag