Description

Specifications:

Color: Black

Dimensions: 3.46 in x 1.51 in x 7.48 in

Weight: 3.88 lb

Output Voltage: 12V

Operating Temperature: -40°C ~ +80°C

Compatible Car Models: Small Trucks (Supports gasoline engines, no limitation on displacement)

Applicable Scenarios: Car Ignition Start, Emergency Lighting, etc.

Note: To ensure smooth and successful car startup, please ensure the power level is sufficient.

Dimensional Drawing:

Car Starting Emergency Power Supply Details:

The large intelligent digital screen shows the power at a glance. The large power digital display includes output voltage, current, and remaining power display information. After a full charge, it can be used for 180 days.

This car emergency starting power supply is suitable for weather with various temperatures, and can easily adapt to all kinds of bad weather. The temperature range is from minus 40 degrees Celsius to 80 degrees Celsius. It is not afraid of severe cold and heat, and can be started at low and high temperatures.

This car emergency starting power supply is equipped with LED power supply, which can provide bright lighting and has better safety performance. There are four LED modes: long-range, strobe, SOS rescue light and red and blue double flash.

Instructions for use: Long press the power button, the light will be constant, and can be used for long distances; in the constant state, click the power button to enter the strobe mode; in the strobe state, click the power button to enter the SOS rescue mode; double-click the power button to Can enter red and blue flash mode.

Safety is a top priority. The car starting emergency power supply is equipped with multiple protection systems, including overcharge, over-discharge, short circuit, and overload protection functions, ensuring safety during use. The car starting emergency power supply is designed to be lightweight and compact, making it easy to carry. Whether you are traveling, camping, or on a long drive, it can be conveniently placed in the vehicle’s storage compartment for easy access.

Car Starting Emergency Power Supply Parameters:

Usage Steps:

01. Insert the clip into the power start port to ensure that the power supply is sufficient.

02. The red clip is connected to the positive stage of the car battery, and the black clip is connected to the negative stage of the car battery.

03. Enter the car and turn off the electrical equipment in the car (such as headlights, audio, navigation and other electrical equipment) Start the car again.

04. Remove the clip after starting (it is recommended to remove it within 30 seconds).